Smartphone -Tempered Glass

Using this step-by-step guide, you can easily apply a tempered glass screen protector to your phone's screen.


  1. Clean the screen with the provided wet cloth and then dry it with the provided dry cloth.
  2. Is there still dust on the screen after cleaning? Then use the dust removal sticker to remove the last dusts from the screen.
  3. Place the installation frame on the phone.
  4. Take the screen protector and determine which side should come out at the top of the screen and which side of the screen protector is the adhesive side.
  5. Now remove the foil from the adhesive side completely.
  6. Now hold the screen protector properly aligned above the screen using the installation frame and lower it against the screen, starting from the top of the screen. Once released, you will see that the screen protector naturally adheres to your phone's screen. 
  7. Remove the installation frame and work any air bubbles under the screen protector to the edges using the dry cloth.

Smartphone -TPU

Using this step-by-step guide, you can easily apply a TPU plastic screen protector to your phone's screen.


  1. Clean the screen with the provided wet cloth and then dry it with the provided dry cloth.
  2. Is there still dust on the screen after cleaning? Then use the dust removal sticker to remove the last dusts from the screen.
  3. Put the included installation tool with the feet up into your phone's charging port and place the screen protector on your phone. Make sure the cutouts in the screen protector are over the legs of the installation tool so that the screen protector is properly aligned on the screen.
  4. Grab the card provided and use it to make the area between the two starting lines stick to the screen a little bit in advance. Lift the top half of the screen protector and wipe with the card from the starting line toward the top of the phone, while wiping the underlying plastic layer from under the screen protector. (See video)
  5. Now detach the screen protector from the installation tool and remove it from your phone's charging port.
  6. Turn your phone 180 degrees, now lift the bottom half of the screen protector and swipe again with the card from the starting line towards the bottom of the phone, while swiping the underlying plastic layer from under the screen protector.
  7. Then carefully and slowly remove the top layer of film from the screen protector.
  8. Use the dry cloth provided to rub any air bubbles out from under the screen protector and allow the screen protector to adhere over the entire surface of your screen.

Laptop

Using this step-by-step guide, you can easily apply a screen protector from GrizzlyCoat to your laptop's screen.


  1. Clean the screen with the provided cloth.
  2. Remove the blue film that is on the front of the screen protector. 
  3. Now also remove the white film that is on the back of the screen protector.
  4. Apply the screen protector centered on the MacBook screen. It will stick well to the screen of your laptop by means of static electricity.
  5. Again, use the cloth to wipe away any fingerprints so that you maintain optimal visibility of your screen.